17 Dec 2011 01:09
|I did follow the link, and it has an IDE port and a female CF port, and no PCI connector, or are we seeing different pages?|
|Samuel D Crow|
17 Dec 2011 02:03
|D'oh! I guess I was the one not paying attention. He's probably got an IDE cable connecting his CF controller to the IDE port.|
|Deep Sub Micron|
17 Dec 2011 09:36
|The adapter can be plugged directly into the board's IDE connector (instead of a cable). The CF socket on board can be used as well.|
17 Dec 2011 15:17
|Gotcha :D Seems like its here at the bottom: CLICK HERE but without any pins.|
17 Dec 2011 22:04
|any chance for some bring-up videos? Super-AGA demos?|
18 Dec 2011 03:22
|Hm SAGA demo's need to be written, I do feel it's time for a new demo but ECS capabilities already have been shown.|
can we see a Demo of AGA functionality, please?
18 Dec 2011 17:50
|We saw AB3D II TKG. This game is AGA only.|
Or do you mean a demo demo :) Like music and dancing colors :) ?
18 Dec 2011 18:18
|I don't think I've seen the AB3D II TKG video. Where was it posted? :D|
Edit: Oh, stills at NATAMI Day #21. A video would be sweet though! :D
20 Jan 2012 17:30
|no news, good news ? :-)|
20 Jan 2012 17:44
|Yes, bugs are patched, SW developers get hardware.|
21 Jan 2012 10:38
29 May 2012 12:49
|Is there an update?|
What is the state of this thread?
29 May 2012 15:04
|Thomas workin' part time, in his secret and private cavern 10 000 feet underground :)|
04 Jun 2012 13:22
|Ville H. wrote:|
Thomas workin' part time, in his secret and private cavern 10 000 feet underground :)
You painted something very similar to a BatCave in my mind with this one... Yup!
04 Jun 2012 13:55
|You meant NatCave, right? ;)|
04 Jun 2012 14:53
|Chris Dennett wrote:|
Gotcha :D Seems like its here at the bottom: CLICK HERE but without any pins.
I just have to comment and say how professional that board looks by the person who produced it. The soldering, chip placement and the board all look professional. A class A+++ act in my opinion.
04 Jun 2012 15:02
|And it's all Thomas' work.|
04 Jun 2012 16:28
|Thomas made a good design there are some points i find odd like i've been told to keep the fastest parts near the power supply for instance.|
Hence on a ATX board it is near the memory, but then again I suppose that it has to do with having a stable power source more then that.
I would have mirrored the FD connector so that the wiring of it would be shorter.
Really there is very little bad things to say about the design itself.(as far as i can see on this picture)
04 Jun 2012 18:42
|MX board is beautiful and clean as a whistle. Almost hard to believe that a man did it and not a cyborg :)|
Still, MD will be even better. Imagine that :) Thomas tops himself for yet another masterpiece.
Go Thomas !
10 Jul 2012 19:52
|Any change I can download the gerber/pick&place files? I can produce the boards quite easily....|